Open Ended Timing Belt Clamp for CNC Router
linear Belt Drive
Belt Clamp for 3/8" pitch 1/2", 3/4", and 1" wide L Timing
Belt Drives.
machined from 0.375" Black Nylon
 |
Clamp Measure 3.375" Long x 2" Wide x
0.375" Thick.
Drilled to Bolt on 1020 T-Slot Extrusion or any Flat Surface.
The Clamps are 2" Wide and can be re-Drilled for 1" Wide L-Belts. |
|
 |
Example of clamp used with 80/20 Inc. 1020 T-Slot Extrusion
Mounting a 3/4" Wide Belt.
|
 |
This is an example of
the Nylon Belt clamp used on my machine. I converted the X axes
ball screw to a belt drive. |
|
As with all of my Products, 100% Satisfaction is Guaranteed!
|
